XS Scuba

Submersible Pressure Gauge (SPG) for scuba diving with dual BAR and psi indicators.Features:Nickel plated brass housing for extra strength and durabilityIncludes airspool with viton oringsLuminescent...

Need an extra pocket for your accessories? Most BCD pockets are located too high up on the torso to be easily accessible and are often very small. A thigh pocket is a better option... easier to...

Holds your primary or backup scuba regulator conveniently and comfortably just below the chin for easy access in an emergency. The necklace measure approximately 79cm/31inches circumference or...

Add extra weight to your scuba BCD.Features:Holds up to 5Ibs soft or hard weightSlides over tank cam straps or harness waist strapsAllows optimum positioning for trimming out in the water

Protect your dive tank valve with a valve cover. Comes with string to tie around cylinder valve.

Warm, stretchy neoprene hood for diving in cold waters with a drysuit. Features: 7mm around the head and 5mm on the face seal and neck Stretchy PyroStretch neoprene is comfortable and ensures a...

Bungee cord for a variety of uses including regulator necklaces, forearm mounts for your compass or computer, or wing bladder compression.  Sold by the foot, change the quantity for the...

Excellent dry bag for on the boat, beach, or backpacking. Close the top and roll down for a dry closure. Features: Clear design allows you to see your contents for easier retrieval Shoulder...

Features: Adjustable ankle weights with nylon strap and buckle Filled with round shot, covered with Rynohyde neoprene for extra durability Sold in pairs - 1 pound per leg, 1.5 pounds per leg, or...

Set up your pony bottle or stage tank easily with this kit. Fits 5.125 to 6.0” diameter cylinders. (Kits for larger or smaller diameter tanks available, call or email about ordering)...

Material: Soft siliconeColors: ClearUse: SnorkelStyle: Bite tabs are very slim for a better fit in a small or narrow mouth, curved designed allows for a more comfortable fit in the mouth

Replacement high pressure hose for your gauges. Short length is perfect for a pony bottle setup. Short 6 inches, black.

Add this to right and left modular valves when twinning scuba cylinders. 

Underwater compass for scuba diving.Features:Bungee mount is perfect for keeping your hands free and holding the compass flat and steady underwaterSuperior tilt potential of +/- 30...

Perfect item to add to your save-a-dive kit. Very handy, multi-use tool!Features:Easily attaches to a standard BCD quick-disconnect hoseOne end is a tire filler in case of a flat or low tire on your...

Comfortable, one-size-fits-all lycra sock for use inside a scuba diving boot for extra comfort and protection inside a snorkeling fin. Helps eliminate chafing on feet and makes it easier to put on...

"Not For Scuba" sticker for scuba tank is useful for non-divers using a scuba tank for other activities such as paintballl, air rifle, etc.

This soft pocket weight belt for scuba diving is more comfortable than a traditional webbing belt as the weights are held in external pockets, away from the body and hips. Each pocket holds up to...

This soft pocket weight belt for scuba diving is more comfortable than a traditional webbing belt as the weights are held in external pockets, away from the body and hips. Each pocket holds up to...

This soft pocket weight belt for scuba diving is more comfortable than a traditional webbing belt as the weights are held in external pockets, away from the body and hips. Each pocket holds up to...

Add extra weight to your scuba BCD  Features: Holds up to 5Ibs soft or hard weight Slides over tank cam straps or harness waist straps Allows optimum positioning for trimming out in the...

Stainless steel weight keepers with teeth for scuba diving weight belt to keep weights in place. This item qualifies for FREE SHIPPING! (Regular shipping policies apply when combined with...

Holds up to 5 lbs lead shot (sold separately) with a sealed double velcro opening. Add trim weight in the centre groove of backplate. Attach with twin cylinder band bolts.

Slides onto standard 2 inch webbing to secure d-rings or other accessory items. This item qualifies for FREE SHIPPING! (Regular shipping policies apply when combined with other items)

Nitrox sticker for scuba tank.

Double check the air pressure of your scuba cylinder, works with both yoke and DIN tank valves.

Protects threads on a DIN tank valve.

Replacement valve for your scuba tank, use with both k-valve and DIN regulators. Spin-out piece on the valve is removable with allen key to transform your valve from k-valve to DIN in seconds. 

Isolator and modular valves for twinning scuba tanks for backmount double tank scuba diving. Features: Includes modular valves (left and right) Includes isolator Available for various pressure...

Replacement valve for your scuba tank comes ready for assembly for your twin tanks for backmount double tank diving, or to use with sidemount diving. Available in DIN or International Pro Valve and...

Stainless steel light weight single scuba tank adapter with bolt kit fits any diving backplate with standard 11 inch holes. Requires two cam straps to hold scuba tanks (not included). Approximately...

Stainless steel tank bands for twinning scuba tanks. For tanks 7.25 inches in diameter.

Stainless steel tank bands for twinning scuba tanks. For tanks 8 inches in diameter. This item is not kept in stock. Please contact us for eta

Octagonal shaped plastic boot for the bottom of a scuba diving tank. 7.25 inch diameter fits standard Aluminum 80 and 63 cu tanks

Easy to carry and stow away when not in use, this snorkel rolls up and easily fits inside your BCD pocket. 100% black silicone. Mouthpiece: Soft silicone, non-replaceable Flexible Tube: Yes Purge...

Holds your primary or backup scuba regulator conveniently and comfortably just below the chin for easy access in an emergency. The necklace measure approximately 60cm/24inches circumference or 19cm/7...

Zip ties for securing a mouthpiece to a scuba regulator or a snorkel. No bump design eliminates sharp end usually found on traditional zip ties. Qty 1 = Package of 10 zipties. This item qualifies...

Routes your regulator hose under the right arm instead of over the should for more comfortable diving. Often used on the backup regulator to improve hose routing. Installs between the second stage...

Unique design includes traditional style dive knife blade with option to use as a scissors. Built-in scissors can cut most anything and is easier than using the knife blade in a sawing action.Use:...

Replacement knife sheath rubber calf straps fit most dive knife sheaths.

Prevents heat loss from your head and provides thermal protection during snorkeling, swimming, or diving in warm water.Use: Warm water scuba diving, snorkeling,...

Keeps your foot or neoprene boot snug inside your fins. Slide over your foot or boot  Keeps your neoprene or drysuit boot snug Prevents air movement to your boots This item qualifies...

Easy to read gauge console includes depth gauge, pressure gauge, and underwater compass. Includes high pressure rubber hose with swivel.Front SideSubmersible pressure gauge made with highly accurate,...

Submersible Pressure Gauge (SPG) for scuba diving.Features:Nickel plated brass housing for extra strength and durabilityIncludes airspoolLuminescent gauge faceManufactured in ItalyThe choice of...

Easy to read gauge console includes depth gauge, pressure gauge, and slot for optional underwater compass. Includes high pressure rubber hose with swivel Front SideSubmersible pressure gauge made...

Compass module fits into backside of XS Scuba Console GA201 (sku 1569). Top and side reading, ratcheting bezel for easy underwater navigation.

Ultra compact, submersible pressure gauge for use with backup air supplies and scuba pony bottle. Features: Rated to 5000 psi Threads directly into any standard first stage high pressure port

Auto lock retractor allows user to keep gear close to BCD and extend and stay when needed. High-force retractor is good for gauges, dive lights, or other heavy accessories. Comes with a variety of...

Stainless steel d-ring for use on scuba diving backplate harness systems or as replacement on diving BCD or other gear. This item qualifies for FREE SHIPPING! (Regular shipping policies...

Comfortable, one-size-fits-all sock for use inside a scuba diving boot for extra warmth or inside snorkeling fin for extra comfort. Outside is nylon material and inside is a soft, polyolefin fleece...

Soft brass tip picks ideal for oring removal without causing damage.

Travel hanger for your scuba diving wetsuit and accessories. Features: Unique folding design is ideal for travel Designed for quick drying and drainage Folding arms for regulator, hood, and...

Perfect hanger for all your scuba diving accessories. Fits boots, hood, and gloves. Keeps gear in better position for drying inside.

Travel hanger for your scuba diving BCD and accessories. Features: Unique folding design is ideal for travel Designed for quick drying and drainage Folding arms for regulator, hood, and...

Hang your drysuit upside down by the boots for better air flow and drying plus you won't stretch out your neck seal. Works for any dry suit or waders with attached boots.